Our 5-axis CNC service gives us greater freedom to machine complex three-dimensional shapes. By approaching a component from multiple angles, we can produce intricate forms, sculptural features and detailed parts that would be difficult to make using conventional cutting methods.

This service is particularly useful for bespoke furniture, curved joinery, decorative architectural elements and components with complex contours. We can work with hardwood, softwood, MDF, plywood, chipboard, Corian, HI-MACS, acrylic sheets and other suitable materials, subject to the design and machining requirements. Whether you need a prototype or a production run, send us your drawings or 3D files and we will review the best way to manufacture it.

Our membrane press allows us to form decorative films and specialist surface materials over shaped MDF components using controlled heat and pressure. This makes it particularly suitable for furniture doors, shaped panels, curved details and other components where the finish needs to follow the form of the substrate.

We can produce individual bespoke pieces or repeat batches, depending on the project. Send us your drawings, dimensions and chosen surface material and we can advise on the most suitable pressing process.

​

​

​

​

Our heated, high-pressure press is used to bond wood veneer or laminate to suitable flat boards. Heat and even pressure help create a consistent bond across the panel surface, making the process suitable for furniture, cabinetry and interior joinery components.

We can prepare individual panels or larger batches to your specifications. If you are supplying the substrate or veneer, let us know the material, sizes and intended finish so we can check that they are suitable for pressing.

​

Veneer stitching joins individual veneer leaves into a larger sheet before it is bonded to a board. Fine stitching holds the leaves in position during preparation and pressing, helping us maintain the selected veneer layout across the finished panel.

This service is useful for furniture doors, wall panels and bespoke joinery where the grain pattern matters. We can discuss the veneer selection, matching pattern and finished panel sizes before production.

Our factory spray finishing service is available for furniture, cabinetry and bespoke joinery components. Depending on the project, we can offer PU, AC and acrylic paint systems in a choice of colours and matt or gloss finishes.

We also offer a selection of more than 200 stain colours for timber surfaces. A stain can bring out the natural grain or help new components match existing furniture and flooring. Send us your colour reference or a sample, and we can discuss the finish required for your project.

Our 4-axis CNC machining service is designed for components that need detailed shaping beyond standard flat-panel cutting. The additional axis allows the tool to work around a part, making it useful for complex profiles, carved details, curved components and bespoke furniture or joinery elements.

It is a practical option for prototypes, one-off pieces and repeat production where the shape needs to remain consistent from one component to the next. Depending on the design and material, we can machine hardwood, softwood, MDF, plywood, chipboard, Corian, HI-MACS, acrylic sheets and other suitable materials. Send us your drawings or 3D model and we will assess the most effective way to produce the part.

​​​

Edge banding covers the exposed edges of sheet materials such as plywood, chipboard and suitable furniture boards. We can apply an appropriate edging material, including wood veneer or PVC, to give panels a clean, finished appearance.

As well as improving the look of a component, edging helps protect its exposed edges during everyday use. This service is commonly used for shelves, cabinetry, furniture parts and panels that will be visible in the finished installation.

​​​​​

​

​

​

​

​

Our wide belt sander prepares timber and panel surfaces for further processing or finishing. It helps produce a smooth, even surface and a consistent result across components that need to match.

We can sand individual pieces or batches for furniture and joinery projects. Let us know the material, dimensions and stage of finish you need so we can advise on the appropriate preparation.

​

​

​

Our planing machines prepare solid hardwood and softwood by creating flat, straight surfaces ready for further machining or joinery work. We can plane timber for furniture components, doors, frames and other bespoke projects.

The maximum stated machining width is 500 mm. Send us the timber species, starting sizes, required finished dimensions and quantities so we can assess the work.

​

​

​

We provide bespoke metalwork and fabrication for furniture, joinery and architectural interiors. From individual brackets and decorative details to complete table bases, frames and specialist structures, each component is produced to suit the dimensions and design requirements of the project.

Our fabrication process includes preparation, cutting, forming, welding and finishing, with close attention to alignment, joint quality and overall appearance. Components can be supplied as finished metalwork or prepared for further treatments such as spraying, patination or Liquid Metal finishes.

Our 3-axis CNC machines cut, route, carve and engrave material by moving the cutting tool along the X, Y and Z axes. This makes them well suited to accurately shaped panels, furniture and cabinet components, signage, decorative patterns and detailed joinery parts.

We work from supplied drawings to produce anything from a single bespoke piece to repeat batches. Our CNC cutting services cover hardwood, softwood, MDF, plywood, chipboard, Corian, HI-MACS, acrylic sheets and other suitable materials. Tell us the material, thickness and finish you need, and we can advise on the best approach to machining your design.

​​

 

​

​

Our beam saw cutting service provides accurate and efficient cutting of sheet materials, including plywood and MDF. We cut panels to your specified dimensions, whether you need individual components or larger production batches.

Careful planning of each cutting job helps us make efficient use of the material and minimise waste. We work with joinery workshops, furniture manufacturers and contractors, supplying panels ready for the next stage of production. Send us your cutting list, material specifications and quantities, and we’ll prepare a quotation.

 

​

​

​

Our heavy-duty bandsaw allows us to make accurate straight and curved cuts in solid timber and other suitable materials. It is particularly useful for preparing thicker timber sections, cutting components to shape and producing thin timber or veneer sections where required.

Depending on the material and project, cuts can be made down to approximately 3 mm, making the machine suitable for specialist joinery, engineered timber components and bespoke furniture production.

Our thicknessing machine brings solid timber to a consistent finished thickness, allowing multiple pieces to be prepared to matching dimensions for furniture, cabinetry, doors, frames and bespoke joinery.

Thicknessing can be combined with planing, sanding and CNC machining as part of the timber preparation process. Send us the timber species, starting dimensions, required finished sizes and quantities for a quotation.

​

​

Our Liquid Metal finishing service allows us to create the appearance, texture and character of real metal across a wide range of bespoke surfaces and components. The specialist coating can be applied to furniture, panels, doors, decorative features and complex forms where conventional sheet metal may not be suitable.

Depending on the project, we can create bronze, brass, copper and other metallic effects, from smooth and refined finishes to heavily textured and organic surfaces. Each piece can then be polished, aged or patinated to achieve the required tone and level of sheen.